Feeding Machine For Coal Mining Feeding Large GLD

Coal Feeding Machine mainly consists of a bin port, a material-guiding groove, a manually operated gate, a driving roller group, a supporting roller group, a bottom frame, a material-removing device, etc.; and all parts are connected with one anther by bolts, and Coal Mining Machine can be moved and assembled detachable and wholly, so that the machine can be used on the ground or underground.

The GLD belt feeder is good in universality and can use main parts of the K reciprocating coal feeder and the vibrating belt feeder.

The belt feeder, a novel eco-friendly, energy-saving and efficient product, is characterized by adopting a continuous conveying type feeding mode instead of the gap reciprocating type feeding mode of the traditional K reciprocating feeder.

Coal Feeding Machine Coal Mining Machine Feeding Large GLD

The connection section is installed in the hopper mouth, under which the guide groove is installed, and a Coal Feeding Machine is installed under the guide tank. A feeding device is composed of driving drum, cushioning roller and bracket, redirection roller, belt, tensioning device, etc.The driving device is driven by the motor and the infinitely variable speed reducer, and the driving drum is driven by the chain drive.The driving device and the feed device are installed on the chassis and can be adjusted.In the upper part of the guide tank, there is an overhaul gate mechanism to realize the opening and closing of the feed opening during maintenance.

we also can supply the mine pneumatic pump,like pneumatic diaphragm pump,pneumatic sewage pump,mine dual fluid grouting pump, explosion-proof immersible pump,wear resistant steel plate,shotcrete machine,rock drill and others mining equipment

Working principle

The material in the hopper is connected to the guide trough and the material is placed on the belt. When the belt is stationary, air cannon the material ends up in the internal friction force and stops the movement, forming a static pile at a certain Angle at the outlet.When driving drum by the driving of the driving gear began to rotate, drives the tape movement, tape drive a belt movement, on the guide material on a belt drive the discharging mouth, running a belt to return after discharging mouth discharge, materials continuously from the discharging mouth eduction, thus completing the process of feeding;The sealing device provides seal for the material leakage between the duct and the tape.Can change quantificationally, by adjusting the speed of speed reducer hand wheel to change the output shaft speed, change the size of the belt speed to achieve, also can by adjusting the inverter frequency, change the motor speed.gas detector

Coal feeder machine

1.stable running

2.feeding material evenly

3.specialized in coal mining

Advantages Coal Feeding Machine Coal Mining Machine Feeding Large GLD

1. Large amount of material, small operation power, energy saving, environmental protection and high efficiency;

2. Adjust the feeding amount to be convenient for manual or variable frequency stepless speed regulation;

3. Stable operation, small noise and environmental protection;

4. Small wear, little maintenance, easy installation and maintenance, long service life;

5. The parts are versatile, easy to install and maintain;

6, using a combination of patent new nail and into a band, improvement of the feeder to hit, put the performance, such as fracture, overloading start distracted the tape by force of impact force and tear, avoids damage due to the large materials falling impact tape, reduced the amount of maintenance, prolong the service life of the tape.Implements a tape and tape the synchronous operation, prevent a belt and belt slip, facilitate clear sweeper armour with adhesive material, block material scattered in the body, keep the site clean environment.

7, using a circular adhesive tape, annular duct tape is made of a forming manufacturing technology, its characteristic is no joint belt core, not because of the early damage and affect the service life of the joint, tape surface smooth, uniform tension, so the tape running smoothly, to use small elongation.The strength of the annular tape and the tear resistance are greatly improved to avoid the breakage of the tape.

8. The belt type feeder can be removed from the belt in certain industrial and mining areas.

we also can supply the mine pneumatic pump,like pneumatic diaphragm pump,pneumatic sewage pump,mine dual fluid grouting pump, explosion-proof immersible pump,wear resistant steel plate,shotcrete machine,rock drill and others mining equipment

Contact us if you need more details on Coal Feeding Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Coal Mining Machine、Feeding Large GLD. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Coal Feeder > Belt Type Coal Feeder